Thanks Charles, Roger E-mail message Sender: techassist-bounce@xxxxxxxxxxxxx From: seashell@xxxxxxxxxx (Charles=A0Belich) Date: Sat, Sep 1, 2001, 1:54pm (CDT-2) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Need Service Codes(Phillips) Reply=A0to: techassist@xxxxxxxxxxxxx Sams 4126, Turn TV on press 1,6,2,5,9,6 then press MENU .Use arrows. Press menu to change menu screens. Press 0,6,2,5,9,6, MENU to enter default screen. The fourth line is the error codes. 0 no error 1 micro ram error 2 general I2C bus 3 EEPROM checksum 4 DBX stereo 5 Signal processor 6 EEPROM 7 Tuner (PLL) Charles Belich Slidewire Electronics MN seashell@xxxxxxxxxx ----- Original Message ----- From: <ElectronMan10@xxxxxxxxx> To: <Techassist@xxxxxxxxxxxxx> Sent: Saturday, September 01, 2001 7:19 AM Subject: [TechAssist] Need Service Codes(Phillips) Just wondering if anyone knows the codes(numbers)to get into the service menu. Phillips Model: PR1917-C122 Chassis: 19A800-7561 Thanks, Roger(Electronic Service) Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.