If you have soldered all the grounds around and under the tuner shield and in the IF area according to RCA then you may have missed one and or the eeprom is bad and or you may have to go through the alignment. Sounds more like the alignment above channel 50. Hope this helps. Gene....... CLICK HERE FOR FREE SOFTWARE FROM UNBEATBLEDEALS.COM http://www.unbeatabledeals.com/dir/?a=weatbug&t=3&s=R_WB1&r=2099 ----- Original Message ----- From: "TechAssist Admin" <techassist@xxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, September 02, 2001 4:23 AM Subject: [TechAssist] Re: 1995 RCA TV > > Check around C7124 for glue & remove it. May need to do a > tuner alignment, could possibly be U7301 (PN 215532 U/V mixer > oscillator), R4517, Q7403, or U3701 (CXA1594L, PN: 215532). > -Clint > > http://orpheuscomputing.com > Clint Hamilton, Owner > sales@xxxxxxxxxxxxxxxxxxxx > Tech-Assist Administration > http://tech-assist.org > techassist@xxxxxxxxxxxxx > (PLEASE include previous correspondence > if replying to this email!!) > > ----- Original Message ----- > From: "Russell Hornsby" <undertaker48@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, September 02, 2001 2:06 > Subject: [TechAssist] 1995 RCA TV > > > > Hi All: > TV TYPE: RCA CONSOLE > MODEL # G25343WK > CHASSIS # CTC 177AM2 > I have a RCA 25" console, came in dead, and I got it running > with no > problem, I did soldered all connections that I could find and > now I have > a problem with the channels. > Channels 1-50 are GOOD, but Channels 51-57 are snowy, Channel > 55 acts > like no signal. Has anybody run across this before. > Any help would be greatly appreciated. > Thank You > Russ > Hornsby Electronics > North Vernon, Indiana > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.