Bob and all, Here is the story. This set SE3535H came in with no video or menu had sound and raster.Requested if anyone had a 221-365-02 IC 6004 for it got one from a Tech Assist member installed it and have video but no menu and if left on it blinks black then bright white. Found a 221-00707 IC that is used as IC 6004 on some 9-700- boards and get good pix and a unstable menu (letters jump)but it does work . I am trying to determine if IC 6004 is causing this, the set does not have the bad blue caps and the ZCU socket has been changed. That is why I am trying to "up-date Eprom"on page two of SM.Thanks Country TV Ron Miller Inez, TX. 77968 ----- Original Message ----- From: "Bob@Bobs tv" <woodman1@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, August 19, 2004 8:14 AM Subject: [TechAssist] Re: Can't remember how to get to page TWO of old Zenith SM (digital) > Ron, > The J Line menu will be displayed in two sections. Use the menu button > to switch between them.. E line is not the same as the J line. E line > settings stop at #23 and J line stop at #28....NO #27... Email me if you > have questions.. > Bob, > > Bobs TV Worcester, ma > > woodman1@xxxxxxxx > > Main 508-853-1482 > Fax 508-853-1480 > ----- Original Message ----- > From: "Ron Miller" <rlmbkm@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, August 18, 2004 4:51 PM > Subject: [TechAssist] Re: Can't remember how to get to page TWO of old > Zenith SM (digital) > > > > When I enter service menu I have a list from 1 (color sub)-23 (store cust > > controls. > > If you push adj (right or left )nothing happens.If you push menu or > direct > > enter a # 1-23 then you can adjust that item using the Adj. keys.Ring a > bell > > Al? > > ----- Original Message ----- > > From: "al m" <ampm@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Wednesday, August 18, 2004 3:05 PM > > Subject: [TechAssist] Re: Can't remember how to get to page TWO of old > > Zenith SM (digital) > > > > > > > When you get in the service menu go to the top left corner and click > > adjust > > > and it should take you to page 2, if I remember correctly ( WHICH ISN'T > > > OFTEN). > > > Al Marquardt > > > ampm@xxxxxxx > > > Al Marquardt Electronic Repair > > > 206 W Main > > > Girardville Pa. 17935 > > > ----- Original Message ----- > > > From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Wednesday, August 18, 2004 2:42 PM > > > Subject: [TechAssist] Can't remember how to get to page TWO of old > Zenith > > SM > > > (digital) > > > > > > > > > > Model: SE3535H > > > > Trying to reset or update EEprom on this,that is # 27 on page two of > > > > service menu. > > > > This is the old two page service menu used in the "J" line digital > > > > sets.Thanks > > > > Country TV > > > > Ron Miller > > > > Inez, TX. 77968 > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > --- > > > > Lost Password: > > > > http://www.tech-assist.org and select "Login Problems?". > > > > Email Archives: > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/