Bill this is what the error codes mean 18 = Standby I2c bus latched 128 = Stereo decoder fault (no location listed) Honestly I find most of the time these error codes are errored, meaning they mean nothing I would do some good old fashioned trouble shooting if it were me. Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc http://supertek.igniteinc.biz ----- Original Message ----- From: <Tvcr9@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 25, 2006 10:34 AM Subject: [TechAssist] CTC203 error codes V18, V128, V128 > Hello techs- trying to solve a start up problem in this chassis CTC203AF9 > (25" 2003 model). When I force set into service mode, I get these error codes: > P1= V18, P2=V128, P3= V128. Can someone tell me what these mean or what > section(s) is causing the set not to come on ? Thank you very much. > > Bill's TV Service > Chandler, Arizona > > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 267.14.22/239 - Release Date: 1/24/06 > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/