[TechAssist] Re: CTC197 Headaches,
- From: Edward Gaidies <teltek3@xxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 26 Aug 2004 08:52:34 -0400
Thanks Guys....
I should have asked for this info 3 weeks ago, Might have been fixed by
now.;-)
Thanks to all, and thanks for attachments.
-Ed-
Ed Gaidies
Tel-Tek Electronics
Ontario-Canada
teltek3@xxxxxxxxxxxx
On 26-Aug-04, at 8:25 AM, Shoreline Electronics wrote:
> Check these scenarios.
>
> On switching supplies like these , I try and check EVERY resistor and
> diode
> and transistor in the primary and feedback loop to be safe..time
> consuming
> but worth it.
>
> Pull the Horizontal output out to prevent any over regulating
> disasters!
>
> ---------------------------------------------------------------
> Text pasted from WinSTIPS 2.0
> http://www.ServiceSoftware.com
> ---------------------------------------------------------------
>
> RCA CTC197
>
> Repeat Failure Of Regulator.
>
> Garris Tv - New Bern, Nc
>
> Replaced U14101, Q14101, R14146, R14145, R14125.
>
> ---------------------------------------------------------------
>
> RCA CTC197
>
> Dead, Fuse Blown
>
> Bryce - Vision Video Labs, Inc
>
> Replace Q14101 (Irf740) #237476, U14101 (Ctda4605-3) #237476 And
> R14125
> (100ohm)
>
> ---------------------------------------------------------------
>
>
>
> ==========================
> Jeff Stielau
> Shoreline Electronics Repair
> 344 East Main Street
> Clinton,CT 06413
> 860-399-1861
> 860-664-3535 (fax)
> jstielau@xxxxxxxx
> ========================
> "If you push something hard enough it will fall over."
> Fudd's First Law of Opposition - Sir Sidney Fudd
>
>
> ----- Original Message -----
> From: "Edward Gaidies" <teltek3@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, August 26, 2004 8:17 AM
> Subject: [TechAssist] CTC197 Headaches,
>
>
>> Anyone got any fixes in their database for a CTC197CN1 Model F36685.
>> Customer said originally set was chirping even though it was not on.
>> Fuse was blown when I started to work on it, and Q14101 was shorted.
>> Have replaced Q14101, Also replaced R14146, Turned set on, and
>> instantly shorted out Q14101 again. Replaced U14101 and Q14101 again,
>> {now nothing, no relay click, just dead.} This is my first CTC197, so
>> any help would be appreciated. This is a 36" set and customer is
>> willing to spend a reasonable amount. I guess what I need is the
>> Troubleshooting Guide, a some help from some that have had some
>> personal experience on this chassis.
>>
>> Thanks;
>>
>> -Ed-
>> Ed Gaidies
>> Tel-Tek Electronics
>> Ontario-Canada
>> teltek3@xxxxxxxxxxxx
>>
>>
>>
>>
>> ----------------------------------------------------------------------
>> ----
> ---
>> Lost Password:
>> http://www.tech-assist.org and select "Login Problems?".
>> Email Archives:
>> //www.freelists.org/archives/techassist/
>>
>
>
> -----------------------------------------------------------------------
> ------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts: