[TechAssist] Re: CTC-187CL3 WithON/OFF etc.on seperate board
- From: "John Myers" <myers_tv@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 18 Aug 2004 14:52:38 -0400
Parts finder lists 207842 for that chassis variation. I suspect that one
number is for the sets where the switches are mountes on the fpa, and the
other is for the switches that are mounted on the main board.
John Myers
Myers TV Service Since 1984
Alliance, OH
ph 330-821-6545
myers_tv@xxxxxxxxxxxxx
www.alliancetvrepair.com
----- Original Message -----
From: "Old TV Man" <mebonnell@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, August 18, 2004 1:50 PM
Subject: [TechAssist] Re: CTC-187CL3 WithON/OFF etc.on seperate board
> I am looking at SAMS 3672 for the CTC187CL3 and the number for the
> switches is 215500.
> The number for the front panel PC board is 225698.
>
> Max Bonnell
> Bonnell TV
> Robinson, IL
>
>
> Sender: techassist-bounce@xxxxxxxxxxxxx From:
> tvservice@xxxxxxxxxxxxx(tvservice) Date: Wed, Aug 18, 2004, 9:34am To:
> techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: CTC-187CL3 WithON/OFF
> etc. on seperate board Reply=A0to: techassist@xxxxxxxxxxxxx
>
> Buck,
> You just told us what the fix was!
> You have a leaky front panel switch!
> Replace front panel keyboard or all switches #207842 Give us the model
> number and we'll give you the part number for the keyboard.
>
> Robert
> tvservice@xxxxxxxxxxxxx
> H & H Electronics Inc
>
> ----- Original Message -----
> From: "S. Pasher" <spasher@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, August 17, 2004 8:58 PM
> Subject: [TechAssist] CTC-187CL3 WithON/OFF etc. on seperate board
>
> Set brought in no power. Replaced F/B and H/O , ran set for 6 hours on
> bench. Customer picked up on Thursday. He returned with it on Monday. It
> is some times interment and won't start. When it does start it will run
> for 15-20 mins OK , then it will start to change channels every 1 or 2
> secs, you also lose any control from the buttons (ON/OFF) etc. There is
> a connector that connects the front panel control board to the main
> chassis. If you pull the connector from the main chassis it will stop
> changing channels and will stay on the last one that was there before
> connector was pulled. It will run fine from that configuration..
>
> Changed the EEPROM, checked soldering,checked switches on front panel
> and all to no removed remote receiver and still same. I haven't done the
> tuner job yet, so I will try that tomorrow
> Anyone have any ideas on this as its got me baffled. Buck Pasher
>
> Buck's TV
> Gander Newfoundland
> Canada
> 709-256-7738 (Fax & Phone)
> ----------------------------------------------
> ---
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
