I thought there was a 39uF cap in that supply ??? Check CR4118. C4401,2,3 CR4401,2 Solder,solder,solder Peggs At 03:31 PM 9/13/02 -0400, Edward Gaidies wrote: > >Have changed the Regulator Kit on this, changed the 2 small caps next to the >IC, the IC and the 470ufd, and the regulator. Set came on ran well for about >15 minutes. Then it went off, Felt Q4101 and it had run so hot it shorted >and took out fuse again. >Anything else I should change...Kit comes with IC, Regulator, 3 Caps >(2.2....15ufd and 470ufd.) > So what did I miss, to make the Regulator run hot. > >TIA. > >-Ed- >Tel-Tek Electronics >Midland, Ontario >Canada. >teltek2@xxxxxxxxxxxx > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/