[TechAssist] Re: CTC169BG chassis. Has a horizontal line across the screen, when first powered on.
- From: "John Myers" <myers_tv@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 2 Sep 2004 20:36:10 -0400
I believe that is normal.
John Myers
Myers TV Service Since 1984
Alliance, OH
ph 330-821-6545
myers_tv@xxxxxxxxxxxxx
www.alliancetvrepair.com
----- Original Message -----
From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, September 02, 2004 1:51 PM
Subject: [TechAssist] CTC169BG chassis. Has a horizontal line across the
screen, when first powered on.
> Has anyone seen this before?
> Vertical circuit checks out good, cannot find any faults!
> This set, when first turned on, has a line across the middle of the
screen,
> while the relay degausses, then the vertical comes up good. Does it every
> time.
> Any known components to check out for this? Thanks. David.
>
> Robinson Electronics
> 1075 Sweeten Creek Road
> Asheville, NC 28803
> Ph./Fax. 828 274-3787
> Toll Free. 1-888 ROBELECT
> www.robinsonelectronics.com
> www.robelect.com
> Mailto: RobinsonElectronics@xxxxxxxxxxx
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
