thanks,i never knew that could happen, good to know . its now in my log book. thanks, gary ----- Original Message ----- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, September 14, 2001 6:18 PM Subject: [TechAssist] Re: CTC chassis Q903 > > Those are the chassis's I was talking about. If you have a extra RCA > speaker laying around you want to destroy , remove Q 903 turn volume all the > way up and shut off TV. Later turn on TV and if you here a big POP speaker > probably blown unless its a heavier speaker than the orginal. > Phillip R Hull > phil245@xxxxxxxxxxxxx > ----- Original Message ----- > From: "GJCHAMBERS" <gjchambers@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, September 14, 2001 4:09 PM > Subject: [TechAssist] Re: CTC chassis Q903 > > > > > > i dont see the actual chassis number, justs ctc.... > > on the ctc 175-186 models, this has been successfull, or you can replace > the > > eprom as well as i have found it to be the orig cause. all functions will > > work,even muting between channels. im not sure the exact chassis number > you > > have, if not these disregard this info, > > gary > > ----- Original Message ----- > > From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Friday, September 14, 2001 6:00 PM > > Subject: [TechAssist] Re: CTC chassis Q903 > > > > > > > > > > If the audio is turned way up and the set turned off and back on it may > > open > > > up the speaker. I've had two of these ctc's do that. > > > Phillip R Hull > > > phil245@xxxxxxxxxxxxx > > > ----- Original Message ----- > > > From: "Robert Herring" <supertek66@xxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Friday, September 14, 2001 4:40 PM > > > Subject: [TechAssist] Re: CTC chassis Q903 > > > > > > > > > > > > > > Normal remote mute operation will work > > > > however muting when power up or channel change will not, so there may > be > > a > > > > popping sound when selecting channels or when power up. > > > > Most customers won't even notice > > > > Robert > > > > supertek66@xxxxxxxxxxx > > > > robert_herring@xxxxxxxx > > > > H&H Electronics Inc > > > > Dallas,Tx. 75233 > > > > ----- Original Message ----- > > > > From: <Tvcr9@xxxxxxx> > > > > To: <techassist@xxxxxxxxxxxxx> > > > > Sent: Friday, September 14, 2001 10:03 AM > > > > Subject: [TechAssist] CTC chassis Q903 > > > > > > > > > > > > > > > > > > > > > > > If this mute transistor is removed to bring back audio, would we > lose > > > the > > > > > MUTE function ? Does removing this transistor cause any problems or > > > > > inconveniences as far as operation is concerned ? Thank you > > > > > > > > > > Bill > > > > > Help make your TechAssist online repair tips > > > > > database better! Submit your fixes here: > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > To unsubscribe write to: > > > > > techassist-request@xxxxxxxxxxxxx > > > > > with unsubscribe in the subject line. > > > > > > > > > Help make your TechAssist online repair tips > > > > database better! Submit your fixes here: > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > To unsubscribe write to: > > > > techassist-request@xxxxxxxxxxxxx > > > > with unsubscribe in the subject line. > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.