I'm not 100% sure, but on most if not all Phillips, Magnavox TVs, the procedure to save is not to turn off at the remote control, but to press the power button on the keyboard. That saves your settings. Unplugging the TV is a final test to verify that the EEPROM will retain your stored settings. Learned that in Magnavox's last person-to-person training class....1992 or 94 HTH. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "repair1" <repair1@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, May 17, 2002 5:49 PM Subject: [TechAssist] 27b800 help!!! cant save vert settings > > I need instructions on how to save vert setting, I tried pressing9,then vol > up, then remove ac power, did not work, > charles betzler > Best Electronics > repair1@xxxxxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/