Wow, sounds like the making of some V-2 drag races :-) The kit is extremely well built and designed. My only tweaks are stacking 5.5-54mm rings on the motor mount to give my steel inserts for rail guides something to bite into, Cotronics aluminum epoxy on the aft ring so I can drill and tap holes right into the epoxy for mounting aeropack adapter, 1/16 routering to round tge leading and trailing edges of the 1/8 thick G10 fins, and of course 4-5lbs of ballast in the nose (or whatever brings me to 2 calibers) with a carbon fiber laminated cover-- since full L's will be on the menu for this girl .... :-) Will definitely be ready for DairyAire so get yours soon and we can plan some drag races! Sent from my iPhone > On Dec 14, 2014, at 12:20 PM, "Richard King" <drrbk@xxxxxxxxxxx> wrote: > > I think my next rocket might be one of MC's 5.5 V2 as well. I need a section > about as long as it's main body tube to lengthen the DX3 anyway. What an > excuse to buy another kit.... > > RK > > > > -----Original Message----- From: James Dougherty > Sent: Sunday, December 14, 2014 12:00 PM > To: TCC chat > Subject: [tccrockets] Rockets > > Thanks again everyone for showing up to the Christmas party last night; had a > great time! > > Anyone building anything? I just glued my aft centering ring into my 5.5 MC > V2 and am working on a third stage for Nike-Nike-Nike 3-stager .... > > > > Sent from my iPhone > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > >