[tccrockets] Re: Nike Smoke
- From: Rob Diehl <rwdiehl@xxxxxxxxxxxxx>
- To: tccrockets@xxxxxxxxxxxxx
- Date: Wed, 29 Jun 2011 19:53:26 -0700 (PDT)
If anyone has a metal detector, perhaps they could start bringing it to the
launches in case we have any cato's
________________________________
From: Jimmy F <Aldocyber3@xxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Wed, June 29, 2011 7:40:31 PM
Subject: [tccrockets] Re: Nike Smoke
Thanks Mike, was pretty sure that Aero Pack sold those parts separately.
Jimmy F.
TRA 12524
From: mike bailey
Sent: Wednesday, June 29, 2011 7:36 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Nike Smoke
that would be hard to find, the Aeropak website has them :
TRS54 Tailcone Retainer Spacer, 54mm $6.00
-----Original Message-----
From: Jimmy F <Aldocyber3@xxxxxxx>
To: tccrockets <tccrockets@xxxxxxxxxxxxx>
Sent: Wed, Jun 29, 2011 7:33 pm
Subject: [tccrockets] Re: Nike Smoke
Check that, I did not lose the adapter ring it was the spacer ring.
Jimmy F.
TRA 12524
From: Jimmy F
Sent: Wednesday, June 29, 2011 7:31 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Nike Smoke
I did lose my Aero Pack 54-75 adapter ring on my CATO if anyone found that part.
It basically is a aluminum centering ring which has a very detailed profile.
I looked around that area but could not find it, if anybody found it I would
appreciate it if I could get it back.
Jimmy F.
TRA 12524
From: Jimmy F
Sent: Wednesday, June 29, 2011 7:25 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Nike Smoke
I think that may be off of Chris’ Dominator 4.
Chris didn’t you lose one of those on your flight?
Jimmy F.
TRA 12524
From: Karl Baumheckel
Sent: Wednesday, June 29, 2011 7:22 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Nike Smoke
I found an aluminum rail guide that may be to your rocket. I thought it was
from a nike smoke because it has a stand off spacer. If it is yours and you
want it I can mail it to you.
Karl
________________________________
From: "Jimmy F" <Aldocyber3@xxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Wednesday, June 29, 2011 7:11:11 PM
Subject: [tccrockets] Re: Nike Smoke
Yes I had CATO with the AT demo K1045 propellant X. But it was in my Dominator
4
not the Nike Smoke.
I have the rocket all ready to go again, thanks to Jack for having everything I
needed to get it rebuilt.
But Steve Sawyer flew one of the K1045 propellant X motors in the Nike Smoke
drag and had good success with it.
I’m thinkin something a little more interesting for the next flight of the
Dominator 4...
Jimmy F.
TRA 12524
From: Karl Baumheckel
Sent: Wednesday, June 29, 2011 6:56 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Nike Smoke
Jimmy,
Who was the flyer of the Nike Smoke that CATOed at Dairy Aire? Was that yours?
Karl
________________________________
From: "Jimmy Franco" <aldocyber3@xxxxxxx>
To: "TCC -Chat" <tccrockets@xxxxxxxxxxxxx>
Sent: Tuesday, June 28, 2011 9:04:31 AM
Subject: [tccrockets] Re: Couldn't resist
Yes maybe we should have made one of these with your loaner cases before my
first K motor attempt...failed.
I will achieve success soon with a K.
This photo is obviously from at flyer who uses only CTI reloads.
Jimmy F.
TRA 12524
From: Jack Garibaldi
Sent: Monday, June 27, 2011 5:33 PM
To: TCC -Chat
Subject: [tccrockets] Couldn't resist
Hey Jimmy
I saw this and thought of propellant X
Jack G
Other related posts:
