I think that may be off of Chris’ Dominator 4. Chris didn’t you lose one of those on your flight? Jimmy F. TRA 12524 From: Karl Baumheckel Sent: Wednesday, June 29, 2011 7:22 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Smoke I found an aluminum rail guide that may be to your rocket. I thought it was from a nike smoke because it has a stand off spacer. If it is yours and you want it I can mail it to you. Karl -------------------------------------------------------------------------------- From: "Jimmy F" <Aldocyber3@xxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Wednesday, June 29, 2011 7:11:11 PM Subject: [tccrockets] Re: Nike Smoke Yes I had CATO with the AT demo K1045 propellant X. But it was in my Dominator 4 not the Nike Smoke. I have the rocket all ready to go again, thanks to Jack for having everything I needed to get it rebuilt. But Steve Sawyer flew one of the K1045 propellant X motors in the Nike Smoke drag and had good success with it. I’m thinkin something a little more interesting for the next flight of the Dominator 4... Jimmy F. TRA 12524 From: Karl Baumheckel Sent: Wednesday, June 29, 2011 6:56 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Nike Smoke Jimmy, Who was the flyer of the Nike Smoke that CATOed at Dairy Aire? Was that yours? Karl -------------------------------------------------------------------------------- From: "Jimmy Franco" <aldocyber3@xxxxxxx> To: "TCC -Chat" <tccrockets@xxxxxxxxxxxxx> Sent: Tuesday, June 28, 2011 9:04:31 AM Subject: [tccrockets] Re: Couldn't resist Yes maybe we should have made one of these with your loaner cases before my first K motor attempt...failed. I will achieve success soon with a K. This photo is obviously from at flyer who uses only CTI reloads. Jimmy F. TRA 12524 From: Jack Garibaldi Sent: Monday, June 27, 2011 5:33 PM To: TCC -Chat Subject: [tccrockets] Couldn't resist Hey Jimmy I saw this and thought of propellant X Jack G