I’ve got a bunch of drinks/beer. Anyone into dark beer? I picked up a growler
of micro dark from a local.......
RK
From: James Dougherty
Sent: Friday, April 5, 2024 7:57 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Cleaning Party - April 6th
looking forward to it!!!!
Thank you, Mike
On Fri, Apr 5, 2024 at 12:36 PM Mike Smith <msmith9144@xxxxxxxxx> wrote:
Good afternoon TCC,
Looking forward to seeing you at the Annual Club Cleaning. Tomorrow morning
9:00am. For those of you coming out. Bring your favorite chair. Lunch will be
provided.
Heres my address: 3108 S Blythe Ave, Fresno, CA 93706
On Tue, Apr 2, 2024 at 8:44 PM James Dougherty <jafrado@xxxxxxxxx> wrote:
outstanding, thank you, gentlemen!!!
I’m hoping that we have more people show up for the cleaning party this
weekend!
On Tue, Apr 2, 2024 at 7:04 PM Mike Smith <msmith9144@xxxxxxxxx> wrote:
Lined up both porta potties for the clean out service tomorrow
MS
Sent from Gmail Mobile
On Tue, Apr 2, 2024 at 6:28 PM Richard King <drrbk@xxxxxxxxxxx> wrote:
Both sets of porta-potties are at Mike’s now. They will be pumped dry
tomorrow by RAT. I have the (hopefully) correct hardware to mount the better
units onto
the smaller trailer.
Only the converted unit will return to Maddox Dairy. The old trailer
will need a new home. We can try to sell it, give it to an interested party,
or ? It just can’t sit at Mike’s
they way it sat at the silos for who knows how many years.....
RK
From: James Dougherty
Sent: Tuesday, April 2, 2024 4:24 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Cleaning Party - April 6th
battery boxes are fine!
We do need a new wagon that one has seen better days
And those batteries are super light, especially the new ones will be
even more light
Besides, It is a good workout :-)
But yeah, we will look at them and see what we wanna do
On Tue, Apr 2, 2024 at 8:55 AM Kenneth Powell <kentherocket@xxxxxxxxx>
wrote:
Great, I plan on being there. It was the battery boxes I was looking
at so they can be stacked to save space and are easier to carry to the pads.
If you don't mind getting me the dimensions of the batteries that
would be great. I was thinking of using a hand truck as the base of a design to
have them stacked together to get them out of the wagon and could be easier to
be pulled in and out of the trailer.
On Sun, Mar 31, 2024, 10:03 PM James Dougherty <jafrado@xxxxxxxxx>
wrote:
Hey Folks
Here is the hitlist, this includes new hardware and notes from last
months launch
(also attached as text file)
TCC CLEANING CHECKLIST 2024
New Hardware Needed
- Grinder/Brush to grind the blast deflectors and soot off of them
(Quad-Pods)
- New Containers (Kenny is going to send us a link to review)
- Blind nuts for the back of the trailer license plate (1-4/20)
- Broom for sweeping the floor
- Anti-Skid stickers for the door so people don't slip and break
their neck
- James to review A/B relay wiring and open/re-solder wire as
needed,
power cable on B relay is hoarked/wonky and connector possibly
damaged.
- Estes Pads are missing rod set-screw (1/4-20 tabbed)
- Foam bumpers (Schedule-40 pipe insulation) for side door and top
of trailer
so people don't hurt themselves too bad when they hit their head
walking
in and out of the trailer
- New Estes flight card holder
- Bring clips to fix the existing card holder (black metal paper
clips)
- On new BT Stereo, Right and Left are swapped on the Stereo PA
(the left
side is not that loud, possibly using Mono 1/4 Jack instead of
Stereo)
- New Boxes for each pad
- Spraypaint TCC on Each one (stencils are in the Trailer with
blank signs)
High Level Plan
- Overhaul all of the launch leads (new Gator clips, leads, etc)
- Test launch system, charge batteries (replacements on order, will
be
available before April Launch)
- Service any pads, clean all rails, update stand-offs
- We need new to check and grease the stansions for the 1010 pads,
and
should check the 2020 pads, go through each rail and check for
stand-offs
- Go through tool-boxes, all items in trailer, organize
- Fix dollys (need to fill tires with foam again)
- Check PA, make sure all is well with fuses and our PA system
NOTE: we will need the PA for one more year, will build a siren
button
next year (including multiple sounds for coming in hot, etc)
- Service Generator and check oil
- Check Fire Extinguishers
Trailer
- Empty out, sweep, use compressed air to clean it
- Open up all tables and put boxes on it
- Open boxes and make sure all is sorted properly and matches label
- Clean out trash
- Take out launch system
- Wire all launch system - check batteries and relay
- This year, we will take out the old launch system - eitehr sell or
someone can store.
- Tires, check pressure and wear
Launch Gear
- Generator - setup for power
- PA System - setup and test, check leads, etc.
- BT PA System - setup and test, check leads, etc.
- Quad Pods, take each one out, inspect, clean fittings,
remove/replace damaged parts. Some of the quad-pods need
to be tapped again to make sure the knobs work ok. Grease
and service.
- The EZ-Ups, do a quick check and spray down dust
- The tires on the carts & dollys need to be patched, inflated, and
foamed
- Pack Everything in the right box
- Put back in Trailer
Launch Rods/Rails
- All of the rods, pads and rails need to have a bath in :
#1 - White Vinegar - scrub as needed with a scrub-brush
#2 - Alumibrite - spray on, let it sit
#3 - pressure wash (2000 psi or more)
Put down tarps first so we don't make a toxic waste area when
cleaning
Try to gring the blast deflectors on the quad pods.
This one takes the most time and where we can really use all the
extra
help - anyone who has seen our hardware knows we like everything
squeaky clean. Follow up with grease/WD40 for all
threads/rods/fittings, etc
Replace stand-offs on rails, use new 80-20 bolts/inserts and
hardware.
Launch system
- Range boxes and extension cords - we need to do proper fan-out on
each
range box which means going through the extension cables and
making launch
lead locations 6 ft apart from the box in the middle.
- We DO NOT need to charge all the batteries, pick the ones with
the highest
voltage and charge them (we will keep two as backup and replace
all).
- We will review the Igniter leads, replace all of the ones which
are bad.
- Go through and organize cables, each box will have:
- Antenna, Relay, 6 Leads for Igniters - Label outside
- Documentation - James to make a copy of LDRS37 docs, range docs,
waiver
- Range Documents - thorough review
- Signs - Lets review all Signs and sort and put in the right bin
---
Jimmy, can you send me the list of McMaster parts for the Quadpod
knobs and what size Tap I should bring to clean
them out? Rod, I tried to get the latest AGM batteries with
discount, but I will hear back from them this week. Will
have new batteries for April Launch before DA. Can you get
Alumabrite for the Rods?
Kenny, I found some of the exact same boxes we have for the
existing cables (Yellow and Black ones) at Harbor
Freight, and they are cheap. Let us know which ones you were
looking for and how many can stack.
Thanks everyone, and thank you Mike for accommodating us!!!
On Sat, Mar 30, 2024 at 5:29 PM Richard King <drrbk@xxxxxxxxxxx>
wrote:
I’ll be there
R King
From: Mike Smith
Sent: Saturday, March 30, 2024 10:04 AM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Cleaning Party - April 6th
Good Morning TCC,
Wishing everyone a Happy Easter
Just a kindly reminder for 4-6-24 next Saturday. The club
cleaning party is at my place. I do need a head count by 4-4
Location 3108 S Blythe Ave, Fresno, CA 93706.
MS
Sent from Gmail Mobile
On Thu, Mar 21, 2024 at 4:09 PM Tom Rouse
<rousetechtom@xxxxxxxxx> wrote:
Is anyone from the Bay Area going?
I need to get Larry his motor and he’s attending
Sent from my iPhone, so expect typos!
On Mar 21, 2024, at 1:56 PM, Bruce Rohn <bhrohn@xxxxxxxxx>
wrote:
I need Jim to be there to keep me out of trouble
On Thu, Mar 21, 2024 at 10:14 AM Jim Norton
<dmarc-noreply@xxxxxxxxxxxxx> wrote:
Count me in
Jim Norton
Sent from AOL on Android
On Wed, Mar 20, 2024 at 4:20 PM, Mike Smith
<msmith9144@xxxxxxxxx> wrote:
Good afternoon TCC,
CLEANING PARTY SATURDAY 4/6/2024
Annual Cleaning Party same set up as last year. Start
time 9:00 am- till we’re done. Usually last 4-5 hours. Lunch will be provided.
Be sure to bring your favorite lawn chair. I would like to get a final head
count no later than Thursday 4/4/2024. So I can get the lunch setup going. Any
questions feel free to reach out. 1-559-696-7368
Location:
3108S Blythe Ave, Fresno, CA 93706
Sent from Gmail Mobile
On Mon, Mar 18, 2024 at 8:42 PM James Dougherty
<jafrado@xxxxxxxxx> wrote:
hey everybody, please save the date of April 6 because
that is when we’re going to meet at Mike Smith’s and have the annual cleaning
party. We will get all of our gear ready for Dairy Aire and the rest of the
flight season. Rod, Kenny and I made a reservation todo list and we will send
that out in the week ahead.
Make sure you save the date. Oh yeah, there will be
lots of fun and food as well!!!
