yes, exactly what the TARC team figured out for their tube fin rocket. just a small stand-off
On 2013-04-18 21:56, William Kellermann wrote:
One on a stand-off at CG and one on a stand-off at the aft end of the airframe with the rail going through a tube, unless the tube is too small for a 1010 rail to run through. On Apr 18, 2013, at 9:19 PM, Ari Krupnik wrote:It's for a tube-fin rocket. I'm having a hard time coming up with a place to put buttons on that geometry. I did my L2 on a scratch-built tube-fin with 1/2" lugs at Snow Ranch. Ari. On 4/18/13 7:54 PM, Jack Garibaldi wrote:I wonder who flies 1/2" launch lugs on High Power vehicles, it is called rod whip or use rail buttons. There might be one in there Jack G -----Original Message----- From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Ari Krupnik Sent: Thursday, April 18, 2013 6:52 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] 1/2" rod I wonder if TCC has half-inch launch rods. I'm pretty sure I've seen some, but I want to confirm. Ari.