[tcb] Re: oil pressure
- From: ATX BUS <atx_bus@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Tue, 13 Jan 2009 12:21:39 -0800 (PST)
I'll check for a short. Overall my wiring is good, since I ran a new harness
about a year ago.
As for the oil pressure gauge I should give that a try. What's normal
pressure? I have a 1600 single port.
Thanks for the input fellas!
________________________________
From: "mechmark@xxxxxxxxxxx" <mechmark@xxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, January 13, 2009 1:30:49 PM
Subject: [tcb] Re: oil pressure
Does the light go out with the key on and unplugged from the sending unit.
check for a short first.
-------------- Original message --------------
From: ATX BUS <atx_bus@xxxxxxxxx>
I need some suggestions for chasing a potential oil pressure issue.
Over the weekend when I started my bus I noticed the oil pressure light did not
go off. I verified that there was enough oil, restarted and the same thing
happened. So I replaced the oil pressure switch and the light remains on. Any
helpful suggestions on trouble shooting this situation are appreciated.
Jeff
Other related posts:
