i have oil all over the back of hte bus, it's a slow leak (about a quart every 2-3 weeks) but it still is making a mess on the rear of the bus. it doesn't do it unless the motor is at high revs, when i park the bus i don't see anything on the ground after letting it sit. basically i'm down to crank case pressure or a pressure seal gone bad flywheel would be one oil cooler would be the other, the push rod tubes are clean around the seals> Subject: [tcb] Re: oil leak....still> From: evilscientistboo@xxxxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx> Date: Thu, 29 May 2008 06:32:43 -0500> > Can you summarize the problem again?> > On Thu, 2008-05-29 at 06:26 -0500, Brian Denning wrote:> > it's dry around the cooler (as far as i can tell), there isn't any oil> > on the top of the case, the dipstick is fixed, the push rod tubes look> > good, basically i'm down to the cooler is leaking and i'm a doofus, or> > the fly wheel seal. it's a pressure leak cause it wont' do it unless i> > go over 55.> > > > ______________________________________________________________________> > Make every e-mail and IM count. Join the i’m Initiative from> > Microsoft.> > _________________________________________________________________ Give to a good cause with every e-mail. Join the i’m Initiative from Microsoft. http://im.live.com/Messenger/IM/Join/Default.aspx?souce=EML_WL_ GoodCause