[tcb] Re: Rear wheel outer seal removal
- From: Eric Woodall <ericthomaswoodall@xxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Fri, 7 Jan 2011 14:11:04 -0600
Sounds like you just need a new rubber stub axle seal.
No special tools needed but make sure you have some gear oil as you probably
lost some due to the leak.
On Jan 7, 2011, at 1:45 PM, "Ten Over Surf Co." <tenover@xxxxxxxxxxxxx> wrote:
> Anyone have experience with this?
> I removed the rear drums and replace the shoes and wheel cylinders but
> noticed something oozing out around the seal when I turned the axle.
>
> The bearings aren't making any noise but would like to fix the small leak so
> the brakes stay clean.
> Do I need any special tools to remove and install a new seal?
>
> Any help would be appreciated.
>
> Thanks
>
>
Other related posts:
