[tcb] Re: Question about painting my 23 Window

  • From: Eric Woodall <eric@xxxxxxxxxxxxxx>
  • To: tcb@xxxxxxxxxxxxx
  • Date: Wed, 19 Aug 2009 11:13:01 -0500

Every vw that I've ever owned has had a black undercoating.
Sammie/Will, what's the verdict?

James Dwan wrote:
> Thanks for all the replies. I was leaning towards single stage and no
> undercoating but Jay was very keen on coating it.
> So when I se black belly pans on 23 Windows that is incorrect in
> general or was there a cutoff year when they painted them black
> instead of grey?
>
>
> --- On *Wed, 8/19/09, sammie smith /<bugcollections@xxxxxxxxxxxxx>/*
> wrote:
>
>
>     From: sammie smith <bugcollections@xxxxxxxxxxxxx>
>     Subject: [tcb] Re: Question about painting my 23 Window
>     To: tcb@xxxxxxxxxxxxx
>     Date: Wednesday, August 19, 2009, 10:10 AM
>
>     You can make clear coat look better easier but original is single
>     stage.  And single stage is easier to repair problems.  I use PPG
>     Concept acrylic urethane.
>      
>     Wheel wells are painted body color.  Undercarriage and belly pans
>     are painted grey primer.  I would just use a good quality grey
>     paint acrylic urethane.
>      
>     Don't undercoat unless it is already undercoated.  In which case
>     it is almost impossible to remove the old undercoat.
>
>     --- On *Wed, 8/19/09, James Dwan /<james_dwan_2000@xxxxxxxxx>/* wrote:
>
>
>         From: James Dwan <james_dwan_2000@xxxxxxxxx>
>         Subject: [tcb] Question about painting my 23 Window
>         To: tcb@xxxxxxxxxxxxx
>         Date: Wednesday, August 19, 2009, 9:05 AM
>
>             The Bus has been blasted and body work is in progress.
>             I am trying to decide if I should go single stage or clear
>             coat. What are the pros and cons?
>             Also, Jay, is suggesting that I use an undercoat for the
>             wheel wells, splash pans and belly pans.
>
>             My concern is that if anything like a rock hits the Bus
>             with clear coat on it, it would be more difficult to touch
>             it up than if it were single stage.
>
>             Also the undercoating, even if mixed with paint wouldn't
>             even resemble stock. I plan on driving it around the lake
>             and to all the shows but not too much more than that.
>             And lastly, should I paint the wheel wells and belly pans
>             black? Or were they red?
>             I am searching The Samba for pics but it's slow going.
>             Thanks!
>
>
>

Other related posts: