[tcb] Re: End of the world
- From: "chuck" <sukchew@xxxxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Sun, 11 Apr 2010 10:23:43 -0500
It's not the end of the world but you can see it from where you are.
Remove the rocker arm assembly and the push rods.Then take out the push rod
tubes in question then replace them with the expandable tubes and
reassemble.
It's a pretty easy repair.
oleblue
----- Original Message -----
From: "Julie" <julie.hey.ho.lets.go@xxxxxxxxx>
To: <tcb@xxxxxxxxxxxxx>
Sent: Saturday, April 10, 2010 6:31 PM
Subject: [tcb] End of the world
So is it the end of the world if one of my 1600 engines is missing
those pieces of tin that go over the push rod tubes? I have been told
that I can take out the middle two push rod tubes and put the pieces
of tin in and then replace the extracted push rod tubes with those
flexible push rod tubes. Is this my only option other than pulling
the heads and all of that?
Julie
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2803 - Release Date: 04/10/10
18:32:00
Other related posts:
