[tcb] Re: 46 mm hammer wrench
- From: Ronnie Hughes <fracdogii@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Tue, 23 Mar 2010 17:58:38 -0700 (PDT)
Thanks Chuck. I've been beating on my 15" cresent wrench and it hasn't even
budged. By the way, is it a LH or RH thread? Lefty loosey, righty tighty or
am I doing a good job of tightening it?
________________________________
From: chuck <sukchew@xxxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Tue, March 23, 2010 7:48:49 PM
Subject: [tcb] Re: 46 mm hammer wrench
Ronnie,I have one and will bring it to Nac.
oleblue
----- Original Message ----- From: "Ronnie Hughes" <fracdogii@xxxxxxxxx>
To: <tcb@xxxxxxxxxxxxx>
Sent: Tuesday, March 23, 2010 7:42 PM
Subject: [tcb] 46 mm hammer wrench
> I need to borrow or buy a hammer wrench to help get the nut off the rear axle
> on my bus. If you have an extra or can loan until the classic bring to nac
> this weekend.
>
>
>
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2766 - Release Date: 03/23/10
19:33:00
Other related posts:
