[suncommunity] SunPCi IIpro problem
- From: Matt <mw5@xxxxxxxxxxxxxxxx>
- To: Sun Community Forum <suncommunity@xxxxxxxxxxxxx>
- Date: Sat, 31 May 2003 22:14:49 +0100
This message was sent from: Sun Community Forum.
<http://www.gekkou.co.uk/forum/read.php?f=1&i=554&t=554>
----------------------------------------------------------------
I recently installed an Expert3d-Lite into my blade 100 and I also use a
SunPCi IIpro through X a lot. For awhile there was no difference in
operation between the two except that I could take my resoultion to
1600x1200x75. Then, for no reason I could see, drawing operations in the
SunPCi X window began to take FOREVER!--There is clipping when I refresh the
desktop or move the mouse fast, and there is at least a 2 second lag when I
move windows around in it, too.
I installed Solaris 9 from scratch in the last few weeks, but that hasn't
changed anything. Can anyone help me diagnose this problem? Thanks.
Here is some output from fbconfig if it helps:
fbconfig -propt
--- OpenWindows Configuration for /dev/fb ---
OWconfig: machine
Video Mode: 1280x1024x75
Accum: Disabled (do not allocate an accumulation buffer)
Samples Per Pixel: 16 (Note: configured video mode doesn't support
multisampling)
Multisample Mode: Disabled (multisample visuals will not be available)
Default Visual: Non-Linear Normal Visual
Visual Ordering: Linear Visuals are last
Overlay Visuals are last
OpenGL Visual Expansion: enabled
Gamma Correction Value: 2.22
Gamma Correction Table: Available
Fake8 rendering: disabled
fbconfig -prconf
--- Hardware Configuration for /dev/fb ---
Type: Expert3D-Lite
PROM Information: @(#)ifblite.fth 1.14 00/10/23 SMI
EDID Data: Available - EDID version 1 revision 2
Monitor type: DEL product code 20856 S/N 875573316 DOM 47W/2000
Monitor possible resolutions: 1024x768x60, 1024x768x75, 1280x1024x75,
1280x1024x85, 640x480x60, 1600x1200x75
Current resolution setting: 1280x1024x75
Slave Mode: Disabled
Video Memory Total: 33554432
Video Memory Used: 20971520
Texture Memory Total: 16777216
Texture Memory Used: 0
Display List Memory Total: 8388608
----------------------------------------------------------------
Sent using Phorum software version 3.3.2c <http://phorum.org>
Other related posts:
