[suncommunity] Re: Blade 100 DIMM and ECC registered
- From: Robin KAY <komadori@xxxxxxxxxxxxx>
- To: suncommunity@xxxxxxxxxxxxx
- Date: Thu, 29 May 2003 22:27:24 +0100
Adrien Farkas wrote:
> hey folks,
>
> I did a mistake and bought a 256mb ecc dimm, but registered. this, of
> course, doesn't work in the SB100.
If you place a jumper across JP6 (on the edge of the mainboard next to
the DIMM sockets) then you should be able to use registered DIMMs. Of
course, then unregistered DIMMs may not work.
--
Wishing you good fortune,
--Robin Kay-- (komadori)
Other related posts:
