Livio, Not a problem at all. Neal From: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Livio Novi Rodriguez Sent: Saturday, August 02, 2014 6:32 PM To: studiorecorder@xxxxxxxxxxxxx Subject: [studiorecorder] Re: Monitoring a recording with headphones Hello Neil and sorry for misunderstanding. Best regards, Livio Novi. De: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] En nombre de Neal Ewers Enviado el: sábado, 02 de agosto de 2014 18:08 Para: studiorecorder@xxxxxxxxxxxxx Asunto: [studiorecorder] Re: Monitoring a recording with headphones Hi, this has nothing to do with normalization. I want to hear the headphones as I am recording and also in playback. Normalizing does not do this. Neal From: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Livio Novi Rodriguez Sent: Saturday, August 02, 2014 6:02 PM To: studiorecorder@xxxxxxxxxxxxx Subject: [studiorecorder] Re: Monitoring a recording with headphones Hello Neil: Just connect your headphones all the time when you record. Then, before you listen to your recording, use the Normalize feature, which is in the process menu. If you have any questions, please let me know. Best regards, Livio Novi. De: studiorecorder-bounce@xxxxxxxxxxxxx [mailto:studiorecorder-bounce@xxxxxxxxxxxxx] En nombre de Neal Ewers Enviado el: sábado, 02 de agosto de 2014 17:16 Para: 'sr' Asunto: [studiorecorder] Monitoring a recording with headphones Hi, In every recording application I have, one is easily able to decide to hear, or not to hear, the sound that is being recorded through headphones. I have always been amazed that I cannot do this with studio recorder. Perhaps if I use intercom mode, I can, but that sounds like a lot of work and I dont need two microphones and two sets of phones. So, is there an easy way to do this? If not, is there a reason why SR cannot do this? Thanks much. Neal