[sib-access] Re: making some kind of portamento
- From: "Farfar on Laptop" <dgcarlson@xxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Sat, 27 Aug 2011 19:03:09 -0700
Then that's the simple way to do it. Thanks, Dale.
Dave Carlson
From my Dell Latitude 630, currently not nearly close enough for my comfort
to my Audio Recording and Mixing Studios, San Francisco Bay Area. But I'll
try to remedy that situation.
----- Original Message -----
From: "Dale Lieser" <dale.lieser@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Saturday, August 27, 2011 16:24
Subject: [sib-access] Re: making some kind of portamento
They do play back.
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar on Laptop
Sent: Saturday, August 27, 2011 7:19 PM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: making some kind of portamento
K,
I think there's some navigation you can do with the mouse. Point is there's
a lot of reading available to give answers and feasibility. There are also
lines that can indicate portamento but I'm not sure if these are defined in
the playback dictionary.
Dave Carlson
From my Dell Latitude 630, currently not nearly close enough for my comfort
to my Audio Recording and Mixing Studios, San Francisco Bay Area. But I'll
try to remedy that situation.
----- Original Message -----
From: "Kevin Gibbs" <kevjazz@xxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Saturday, August 27, 2011 14:57
Subject: [sib-access] Re: making some kind of portamento
Trouble is, the playback panel isn't accessible, I bet.
Sent from my iPhone
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
