Dale, Thanks so much! I forgot to search in line items before! Very best wishes, Saeed On 5/4/14, Dale Lieser <dale.lieser@xxxxxxxxx> wrote: > Saeed, > > Assuming you have placed the start repeat and end repeat bar lines in their > respective places, do the following to input the first and second endings: > > 1. Select the bar(s) you want for the first ending. Only one staff's bar(s) > have to be selected. > 2. Press "l" to open the lines dialog. > 3. Tab once to get to the system items lines. > 4. Down-arrow a time or two, then use up-arrow to get back to the first > ending line. And Press <enter>. > 5. Select the bar where the second ending begins. > 6. Press "l" for lines. Tab to system lines. > 7. Find second ending open, and press <enter>. > > That should do it. > > Dale > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of saeed Mirzazadeh > Sent: Saturday, May 03, 2014 5:12 PM > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Volta sign > > Hi all. > I'm wondering how I may put volta sign to indicate playing something > different after repeating a passage. For example: we have 6 measure, > after playing the fifth one, the first 4 bars are repeated, then the > sixth one is played. So I need to put volta 1 on fifth and volta 2 on > sixth bar. > Thanks in advance. > Best regards, > Saeed > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx