ok, many thanks dan, but, how can i select the start bar repeat? ----- Original Message ----- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Tuesday, December 16, 2008 6:41 PM Subject: [sib-access] Re: Repeat more than once > It should be enough to select the start repeat bar line and then create a > piece of system text containing the words "5 times". This won't play back > properly of course. > > To make the repeat play 5 times you need to select the end repeat bar line > and then check the play on pass 1, 2, 3, 4, and 5 check boxes in the > playback properties pain. > > 1. Press Control + F1 > 2. Choose live playback properties. > 3. Select the first play on pass button and if it is not checked, press > enter. > 4. Do this for each of the first five play on pass check boxes. > > The whole of the properties window is accessible in beta 2 so this method > will be revised accordingly. > > Dan Rugman > > visit the new on-line resource for visually impaired musicians and home of > Sibelius Access. > www.musicaccess.co.uk > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Gibbs > Sent: 05 December 2008 08:21 > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Re: Repeat more than once > > Typing that instruction as a technique at the beginning fot he first bar > you > want repeated, should probably do it. > > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Ramy Moustafa > Sent: Friday, December 05, 2008 8:08 AM > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Re: Repeat more than once > > > DAve: > > this is exactly that i need, > > i need to print it, > so please, how can i fokas on the start repeat to put the text? > > and where is the Text instruction? > > can i type in the place of the tecnic or anything? > > i mean, just open creat and tecnic, then type repeat 8 times? > > Thanks allot. > Cheers > Ramy Mouswtafa > ----- Original Message ----- > From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx> > To: <sib-access@xxxxxxxxxxxxx> > Sent: Friday, December 05, 2008 9:44 AM > Subject: [sib-access] Re: Repeat more than once > > >> Not sure. In the old Sib with Sib Speaking there was a way to set the >> playback properties dialog to allow more repeats. Don't know if this >> is accessible with Sib-Access. >> >> How about you just copy the bars you want repeated 4 to 8 times and >> forget about the repeat bars? Not pretty, but it will play the way you >> want it. >> >> If you're strictly interested in the score so that another musician >> will play that section 8 times then simply put a text instruction over >> the starting repeat with the words "Repeat 8 time". this will not tell >> Sibelius to repeat 8 times but will tell the performer to do so. >> >> Dave >> >> ----- Original Message ----- >> From: "Ramy Moustafa" <moshtaqlealganna@xxxxxxxxx> >> To: <sib-access@xxxxxxxxxxxxx> >> Sent: Thursday, December 04, 2008 10:48 PM >> Subject: [sib-access] Repeat more than once >> >> >> hi all: >> >> if u please, if i need to repeat a music section more than 3 or 4 >> times, >> >> i know how to incert the start repeat and end repeat bars, but how to >> tell sibelius to repeat this section more than 1 time? i'll repeat >> from mesure 4 to mesure8 4 times >> >> >> ThanksCheers >> Ramy Moustafa >> >> If you wish to unsubscribe, send a blank message with the single word, >> unsubscribe - in the Subject line to: >> sib-access-request@xxxxxxxxxxxxx >> >> If you wish to unsubscribe, send a blank message with the single word, >> unsubscribe - in the Subject line to: >> sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message with the single word, > unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > > If you wish to unsubscribe, send a blank message with the single word, > unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx