[sib-access] Re: Multi-bar rests
- From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Mon, 8 Feb 2010 11:22:35 -0800
Dan,
Thanks, and I don't need to tell you that your last posting on multi-bar
rests is now in my tips and tricks collection, do I?
Oh, and since you're on the topic of updating, I presume that this is for
RC2?
Dave
----- Original Message -----
From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Monday, February 08, 2010 10:47
Subject: [sib-access] Re: Multi-bar rests
OK folks, I've just added some code which identifies multi-bar rest when
they are present. As you enter the bar, you'll hear a message like "bar 4,
12 bar multibar rest".
I'll add a topic on multi-bar rest to the guide as well. It won't be a long
one because it doesn't need to be.
Dan Rugman
Visit www.musicaccess.co.uk
for visually-impaired musicians and home of Sibelius Access
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Rugman
Sent: 08 February 2010 17:52
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Multi-bar rests
Here's some more info on multi-bar rests.
By default, multi-bar rests are turned on in the parts, so you don't need to
worry about them there. Full scores don't normally have multi-bar rests but
you can use them by checking the use multi-bar rests option in the layout >
auto layout dialog.
If you're reading a part or score with multi-bar rests turned on, you will
notice that navigating gets more interesting. To summarise, Sibelius turns
all of the resting bars into one bar that will contain the multi-bar rest.
Sibelius access cannot identify the multi-bar rest, however you will no it's
there because pressing RightArrow will take you straight to the next bar
after the multi-bar rest.
There's one interesting situation which arises when multi-bar rests is
turned on in a part. If the part has no music in it yet, it will appear to
only contain one bar. This is because Sibelius has written out the entire
part as a multi-bar rest.
If you need to add something to a bar which is inside a multi-bar rest, you
must first turn multi-bar rests off. Pressing Ctrl+Shift+M toggles this
option and will reveal the resting bars again. Once you've added what you
need, press Ctrl+Shift+M and the multi-bar rests will be put back.
Multi-bar rests are a good example of how dynamic parts work. The idea is
that you create the music in the full score, letting the parts format
themselves. You only go into the parts when the music is complete, and then
only to modify the layout.
Dan Rugman
Visit www.musicaccess.co.uk <http://www.musicaccess.co.uk/> for
visually-impaired musicians and home of Sibelius Access
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
