[sib-access] Re: Creating Ties?
- From: "Claudio Sacco" <cl.sacco@xxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Fri, 21 May 2010 14:28:37 +0200
Hi Parham
Reading your mail I think, that you are using a Laptop, and that you are
trying to enter your tie using your laptop keyboard. If so, note that you
are much more confortable using a full sized PC keyboard. But if you, like
me, prefer to stick to your laptop keyboard, you must know, that not all
laptop count the enter key of being part of the keypad, when numlock is
turned on. That's the case for example with my laptop. In this case you have
to assign another key command to entering ties. I choose "alt+control+enter"
in place of only enter. If you don't know, how to do this, let me know, and
later I can step you through this setting. Sib-access will not tell you,
that you are tieing notes, while typing, with this setting, but you can
always arrow to verify, that it worked.. I will not tell you, how you can
make Sib-Access verbose, while typing your tie; that's dan's job, if he find
this modification to the script safe.
When entering slurs, Sib-Access should give you feedback; if it doesn't,
then something is going wrong, and you will have to provide more infos to
sort out the problem.
Regards
Claudio
> -----Original Message-----
> From: sib-access-bounce@xxxxxxxxxxxxx
> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Parham Doustdar
> Sent: Friday, May 21, 2010 9:57 AM
> To: sib-access@xxxxxxxxxxxxx
> Subject: [sib-access] Creating Ties?
>
> Hi there,
>
> First of all, I remembered today that I never told the list
> that Dan's fix did fix the Sibelius issue. Thanks!
>
> And secondly, how can I create ties? I tried the solution I
> found on the internet (creating two notes that are the same
> except in length, and then pressing enter), butthat didn't
> work. Also, when I press s to create a slur, I hear something
> else (which I don't even know what that is!)
>
> Thanks again for all the help.
> If you wish to unsubscribe, send a blank message with the
> single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
