Hello experts, I'm trying to evaluate the impact of power plane noise on the HS signals. The sim setup would require to apply a noise source on the PDN (somewhere btw power plane and ground plane), also a PRBS source at the initial end of the t-line. To my knowledge it looks only Cadence Sigrity Speed2000 can run such SI/PI combined sim since the feedback I got from Keysight and ANSYS both said that neither ADS nor SIWave can handle such sim case where time domain sim needs to be run w/ the noise coupled from power/ground plane. Note the coupling needs to be from the whole plane rather than injected at one point for the latter we can simply use a sparam model of the PDN as the means of noise injection but this would not be the equivalent of the plane coupling, right? Any suggestion will be appreciated. Best Regards, Sherman Chen Signal Integrity EMC Global Hardware Engineering Tel: +86 21 60951100-3329 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu