[SI-LIST] inner Xtalk of a differential pair
- From: "Zhou, Xingling (Mick)" <xlzhou@xxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Mon, 10 Nov 2003 13:57:35 -0500
Guru,
I have seen some designers try hard and prefer to reduce (single-ended) =
Xtalk between two trace within a differential pair, sometimes by using =
GSGSG configuration. Obviously, this is not because of a routing =
concerns, it is an electrical consideration. Are there any reasons from =
electrical point of view ? Let's assume symmetric pair. =20
Thanks,
Mick
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
