[SI-LIST] how tables (waveform/pullup/down etc..) in a IBIS files are used/interpeted by IBIS simulators
- From: Sudhanshu SINGH <sudhanshu.singh@xxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Tue, 21 Aug 2007 17:28:13 +0530
Hello all,
I have tried to search for some queries in IBIS modeling cookbook(ver =
4.0).
But the details are not very exhaustive inside.
Can anyone tell or provide some document reference to the following =
points=20
=20
-Interpretation of IBIS file tables =
(waveform/pullup/down/clamp/ramp/vinl/vinh etc..)
by different simulators(Hspice/Hyperlynx/Eldo).
i.e. How simulators use these table to generate output waveform for=20
a given device of IBIS models.
-What all SI parameters are validated from IBIS Models ??
This will in general be of help to all new IBIS learners.
Thanks in advance,
Regards,
sudhanshu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
