Hi Gurus, While doing the SI analysis in XTK i have got the following warnings. WARNING 75: Pin name not found for part R1 1_2. This prevents package capacitance connection WARNING 712: <Out1 Output> <Out1 Output> indicates V5.2- auto-current control. If you wish this to be a current control model (ECL) you MUST use the CURRENT_CONTROL_MODE command in the .mod file. This resistor model used is the default resistor model available with XTK. Though i am getting the results, i don't know whether the result is correct or not. I have captured this warning message from scratchpad. But i am getting the same warning message while using the *.asc file in XTK . I want to clear this warning message.Could anybody suggests me a way to solve this issue?. thanks and regards, Sivakumar.S -----Original Message----- From: Bill Hargin [mailto:billh@xxxxxxxxxxxxxxxxxxxxxxx] Sent: Thursday, March 07, 2002 12:35 AM To: davem@xxxxxxxxxx; Robison_M@xxxxxxxxxxxxxx; si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: lee richey course etc Hi Dave: I would recommend e-mailing your request to him at info@xxxxxxxxxxxxxxxxx I'm sure he would cut you a reasonable deal on replacing the course materials. Best Regards, Bill Hargin Direct: 425-702-0744 Fax: 425-702-0305 Cognition Consulting Electronic Design Software and Consulting http://www.CognitionConsulting.com > -----Original Message----- > From: si-list-bounce@xxxxxxxxxxxxx > [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Dave Macemon > Sent: Wednesday, March 06, 2002 10:50 AM > To: Robison_M@xxxxxxxxxxxxxx; si-list@xxxxxxxxxxxxx > Subject: [SI-LIST] Re: lee richey course etc > > > > > SiQual also offers classes in Signal Integrity. > > http://www.siqual.com/training/index.html > > regards > > davem > > > At 12:43 PM 3/6/2002 -0600, Michael_Greim@xxxxxxxx wrote: > > >I thought Ed Sayre and crew at NESA offered > >a very comprehensive set of classes. > > > > http://www.nesa.com/engsem.html > > > >MG > > > >-----Original Message----- > >From: Robison Michael R CNIN [mailto:Robison_M@xxxxxxxxxxxxxx] > >Sent: Wednesday, March 06, 2002 12:39 PM > >To: 'si-list@xxxxxxxxxxxxx' > >Subject: [SI-LIST] lee richey course etc > > > > > > > >hello, > > > >i took lee richey's two-day signal integrity design > >course at the PCB West last year and learned quite > >a bit. but i have lost the course material and books. > >can i buy that somewhere? > > > >i need to learn more about designing PCB's with signal > >integrity in mind. i'd like to take a series of two- > >to five-day courses and bring myself up to speed on this. > >i've got a BSEE now and my background is digital testing > >(i more or less hack my way thru the signal integrity > >issues i face now). i would appreciate any suggestions > >you folks might have. > > > >i am aware that johnson offers some courses, and gigatest > >too. > > > >thanks, miker > > > > > >------------------------------------------------------------------ > >To unsubscribe from si-list: > >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > >or to administer your membership from a web page, go to: > >//www.freelists.org/webpage/si-list > > > >For help: > >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > >List archives are viewable at: > > //www.freelists.org/archives/si-list > >or at our remote archives: > > http://groups.yahoo.com/group/si-list/messages > >Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > >------------------------------------------------------------------ > >To unsubscribe from si-list: > >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > >or to administer your membership from a web page, go to: > >//www.freelists.org/webpage/si-list > > > >For help: > >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > >List archives are viewable at: > > //www.freelists.org/archives/si-list > >or at our remote archives: > > http://groups.yahoo.com/group/si-list/messages > >Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > === > Dave Macemon > SiQual, A division of Stilwell Baker > davem@xxxxxxxxxx > phone (503)885-1231 > fax (503)885-0550 > http://www.siqual.com/ > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu