Open Data Display window: --->Tools--->Front Panel--->SP TDR On Tue, Jun 1, 2010 at 11:44 AM, Pavle Milosevic <pavle@xxxxxxxxxxxxxx> wrote: > Hello all, > I would like to know what is the preferred method of using the impulse > response data (either produced by ADS ImpulseWriter, or from some other > source) in Agilent ADS transient (Analog/RF Network, not DSP) simulations. > > Is there something analogous to the S-parameter box, that can just be > inserted directly, or is there a more convoluted (or should I say convolved) > method? I know a while ago Agilent was mentioning an ImpulseReader component > to be implemented in the future, but it does not seem to be available in > ADS2009 Update1... > > Thanks, > > Pavle Milosevic > University of Illinois at Urbana-Champaign > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu