Hi all, I am unable to get transient analysis output using spectre. I used this command Transient tran start=0.1ns stop=1000us step=100ns in the spectre netlist I created. It did create .raw directory but then, AWD tool does not show any simulation results/waveforms when I click on .raw. It would be of great help if anyone can help me with this problem. Thanks in advance, Regards, Partha! __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu