[SI-LIST] Simulation models for Agilent 81250 ParBERT drivers

From: "Buchs, Kevin J." <buchs.kevin@xxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Wed, 14 Jun 2006 08:18:26 -0500

We are looking perform HSPICE link simulations with an Agilent 81250 ParBERT
generator as the driver.  I was unable to obtain a simulation model from
Agilent.  Has anyone on this list created or seen a model derived from
measurement?  Perhaps an IBIS model is available.  I wouldn't expect, but
would like, a transistor-based model.  We have a couple of different speeds
of generators, but the most useful one would be the 3.3 GHz.  

Kevin Buchs   Mayo Clinic  200 1st St. SW  Rochester, MN 55901
buchs.kevin@xxxxxxxx  507-538-5459 http://www.mayo.edu/sppdg 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] Simulation models for Agilent 81250 ParBERT drivers

Other related posts: