Hi, I am a new user of Cadence SPECCTRAQuest SI software. While running board-level crosstalk simulations, I have not been able to run these under the condition of victim net at Low state. No matter what option I select, victim net is always shown in High state in the waveforms. I recently attended the SPECCTRAQuest Foundations course and posed this question to the instructor. Yet, I was not able to get the proper answer. It is possible to make this selection in the SigXP, but not under SPECCTRAQuest. Am I missing something here. Can anyone provide help in this matter. Thanks. Regards, Ravinder Server PCB and Flex Development Hitachi Global Storage Technologies *************************************************************************** Always do right. This will gratify some people and astonish the rest. .... Mark Twain ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu