Tom, That does not make sense if you have a driver that is 75 ohm and put a 25 ohm resister in series with it you will get a source impedance of 100 ohms.=20 I would think that receive terminating to 75 ohms the original 75 ohm signal, then re-driving the signal with a driver set up to drive 50 ohms to a 50 ohm receiver is the way to go.=20 Any thoughts? Leonard.=20 -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Tom Dagostino Sent: Thursday, June 01, 2006 4:26 PM To: joel@xxxxxxxxxx; SI-List Subject: [SI-LIST] Re: Running analog video on micro-coax Joel You could try a simple impedance matching network. The simplest would be a 25 Ohm resister in series between your 75 Ohm driver and the 50 Ohm cable. You also might look at what Mini Circuits or other vendors have that will meet your requirements in surface mount networks. Tom Dagostino Teraspeed(R) Labs 13610 SW Harness Lane Beaverton, OR 97008 503-430-1065 tom@xxxxxxxxxxxxx www.teraspeed.com Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 401-284-1827 -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Joel Brown Sent: Thursday, June 01, 2006 2:13 PM To: SI-List Subject: [SI-LIST] Running analog video on micro-coax We have an application which requires running 75 ohm analog video over coax for a distance of 75 Inches. Conventional VGA cables are much to large and bulky because we need to run the cable through hinges and cable retractors. I have seen some micro-coax products from several companies which use very small diameter cable. However all of the micro coax products are 50 ohm and seem to be targeted for digital signals such as LVDS. One approach I am considering is to use a buffer amplifier to receive the 75 ohm signal and then redrive it on the 50 Ohm cable. The only drawback is possible signal distortion from the buffer amplifier. The signal bandwidth is 100 MHz. Any thoughts or ideas would be appreciated. Thanks - Joel -- Binary/unsupported file stripped by Ecartis -- -- Type: text/x-vcard -- File: joel.vcf ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: =20 //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu =20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu