Hi! I had a question regarding the reference voltages in IBIS models. Are the VI tables for max, min, typ for pullup, powerclamp based on the reference voltages i.e. fast=max vcc typ= typ vcc & slow= min vcc. If correct then in order to look at variations of Voh based on VCC I use fast, slow & typ process to run simulations. Am I correct? Please advise Thanks in advance Bob __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu