Hi, The following statements in .mod file, LOADSPEC CON_PACK SPS_FILE g20 NUM_PORT 30 is taken by XTK Windows (EPD3.0). But Unix version is giving errors; ERROR 15: Unknown statement type SPS_FILE Need to use eye diagrams, so unix version. sorry 4 posting this question here. Thanks and Regards, Shankar V Disclaimer: >This message and any attachment(s) contained here are information that is >confidential, proprietary to HCL Technologies and its customers. Contents may be privileged or otherwise protected >by law. The >information is solely intended for the individual or the entity it is addressed to. If you are >not the intended >recipient of this message, you are not authorized to read, forward, >print, retain, >copy or disseminate this message or any part of it. If you >have received >this e-mail in error, please notify the sender immediately by >return e-mail >and delete it from your computer. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu