[SI-LIST] Problems with IBIS2SPICE

From: "Christopher R. Johnson" <crjohnson11@xxxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Thu, 06 Oct 2005 16:41:54 -0400

I am trying to the free (V1.4) version of IBIS2SPICE from Intusoft.  It 
seems to load the template file and IBIS model fine, but when I select 
GENERATE after selecting a model, no matter what I do, it generates a 
zero length ".lib" output file.  It does not generate any errors.  I 
know that it is reading the .mdl file because I added additional options 
and they show up in the options drop down.  Adding additional output 
lines to the .mdl file still results in a zero length file.  It is as if 
it is ignoring the commands in the .mdl file.  It definitely creates a 
new file each time because the time stamp changes, but the file is 
always blank.

Any input (actually any output) would be appreciated.

Chris Johnson

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] Problems with IBIS2SPICE

Other related posts: