Hello Gurus I am designing an Industrial PC mother board there first time I am having more than one devices on a PCI bus so physically if there are 5 devices on a bus the routes should go in the same manner as the topology is or they can go from any device to any device I am in confusion can any one give me some guidelins thanks in advance ------------------------------------------------------- With Regards, Have A Nice Day, Bye, KEDAR P. APTE RTSDG, C-DAC Bangalore Off :+91-080- 5341909/1874 - 145 Res :+91-080- 5269939 ------------------------------------------------------- ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu