[SI-LIST] Overshoot/undershoot for IO buffer

Hi,
I began to suspect something I did before wasn't right. For a simple
topology of a driver and several receivers, I will add serial resistors if
necessary to dampen the waveforms at receivers. However,
overshoot/undershoot at the driver's side was always ignored. I wonder if
the driver's buffer is ok in this case when large overshoot or undershoot
occurs at driver's pin or pad. Thanks.



Shawn


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: