I have seen distributors be willing to do this with a laser. They frequently do this for programmable parts. MG -----Original Message----- From: Rotem Gazit [mailto:rotemg@xxxxxxxxxxxx] Sent: Wednesday, November 06, 2002 3:56 PM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Off topic - IC package marking Hi all, I'm looking for a solution for small quantities (less than 50) IC package marking. I would like to print (somehow) different code words on the IC packages. Limitations: i) I need to use printing <-> can not use hand writing. ii) Must apply paint on the package <-> can not use stickers. Thanks for your help, Rotem Gazit ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu