[SI-LIST] [OT] Extreme vibration electronics
- From: "Martin Euredjian" <martin@xxxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Tue, 6 May 2003 16:22:32 -0700
I'm looking for resources related to electronic design (boards, systems) for
high vibration and/or impact enviroments.
This isn't for airborne/military applications. The applications I have in
mind might include such niceties as: rough handling, unprotected truck
transportation (maybe off-road), equipment falling to the ground
(accidentally) from 3 to 10 feet of height, impact, etc.
What is the state of the art for such things as keeping components from
breaking off the boards, solder-joint cracking/reliability, etc? Is heavy
conformal coating used to protect boards mechanically as well as
environmentally? What are the considerations regarding high-speed design
and SI on these kinds of boards?
Thanks,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Martin Euredjian
eCinema Systems, Inc.
voice: 661-305-9320
fax: 661-775-4876
martin@xxxxxxxxxxxxxx
ecinema@xxxxxxxx
www.ecinemasys.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
