[SI-LIST] N-port s-parameter

All,
    I tried to generate s-parameters of a channel by Hspice, but from the 
manual 
it's seem to just support two ports s-parameter generation. From Synopsys 
website
, it declare that the command .LIN provides for S-parameter extraction (N-port 
model 
generation),but the manual not support the command. Is any documents or 
Informations about the extraction?
Regards

Terence


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: