[SI-LIST] Mixed signal: partitioning GND or unique plane ?
- From: tkrzesaj@xxxxxxxxxxxxx
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 23 May 2003 13:44:27 -0400
Hi,
I read some books and papers saying that one should divide the PCB ground
plane into analog, digital, I/O areas...(e.g. "PCB design techniques for
EMC compliance" M. Montrose) and some other papers are saying that the
best practice is juste using a unique ground plane but placing the
components into block areas controling the return curent flow... (e.g.
"Grounding and Shielding techniques" R.Morrison and, "Best practice in
circuit board design" T. Jarvis)
Is there a best practice ? Can I have some comments ?
Thanks,
Thomas.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
