Hi All, I am running a decoupling experiment and wanted to show the impact of utilizing the 1,000uF low ESR tantalums that Kemet offers. The feedback that I have gotten is that they will only sample 5 pieces which is not enough and I don't want to commit to an entire reel. Is aware of a vendor who offers cut tape for Kemet products or someone who would be willing to give me about 20 pieces. I figured that with all the high power low voltage work that this list creates, someone may have run into this issue already. Thanks for the help. Michael C. Greim MTS - Signal Integrity SONUS Networks Voice: +1 978 589 8336 Fax: +1 978 392 9118 email : mgreim@xxxxxxxxxxxx <mailto:mgreim@xxxxxxxxxxxx> Internet: www.sonusnetworks.com <http://www.sonusnetworks.com/> The Voice of the New Public Network.(tm) The time is gone, the email's over Thought I'd something more to say And All this science they don't understand It's just my job six days a week The time is gone, the email's over Thought I'd something more to say The time is gone the email's over Thought I'd something more to say ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu