AAron, In short, pick one... Imho, entering single values for R, L, and C does a poor job of accurately modeling the package. A more accurate method is to create a package model in which the mutual and self terms can be included as separate entries. Chris Brewster Signal Integrity Engineer SiQual Corporation chris@xxxxxxxxxx phone (503)885-1231 fax (503)885-0550 http://www.siqual.com At 10:17 AM 2/6/2002 -0500, Aaron Frank wrote: >Hello IBIS Experts, > >Can somebody tell me whether mutual and self L and C are summed for lumped >RLC parameters in IBIS models (under [Pins]) or are just the self L & C >reported? > >thnx >AAron > >************************************* >Aaron Frank, P.Eng. >SiberCore Technologies >email: aaron@xxxxxxxxxxxxx >************************************* > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu