Maybe you can get some reference from the HW testers in your company. After bringing up, HW testers will check some signals to make sure the board can work properly. B.R. ---Astrom --- Zhangkun <zhang_kun@xxxxxxxxxx>写道: > Dear all: > > In the SI measurement, which key factor is cared? > > For example, in the DDR2 interface, how do you > ensure SI is OK by means of > measurement? > > I am planning a project which replace measrement by > means of simulation. > > Best Regards > > Zhangkun > 2008.9.10 > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in > the Subject field > > or to administer your membership from a web page, go > to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the > Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are > viewable at: > http://www.qsl.net/wb6tpu > > > ___________________________________________________________ 雅虎邮箱,您的终生邮箱! http://cn.mail.yahoo.com/ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu